Save Up to $800 Per Month!!
Edmond New Homes | Laying the Foundation
You will have your Edmond New Homes team right there with you from start to finish. In contrast, to design studio, to drafting, to construction, to closing, all the way to warranty. We have experience experts in place to guide you and answer the questions we arty know you will have. In fact, we probably can Artie tell you what questions you’re going to have before you have them. You are out there on your own trying to figure this out. And if you are unsure what the processes, let us walk you through it. We are here to make your custom home building process a simple and stress-free experience. We’ve done this a few thousand times, so you know you’re going to get the absolute best client experience.
Let’s talk about the foundation stage here at Edmond New Homes. This stage begins with the creation of a level pad site. Pad elevation is very critical in ensuring proper water drainage away from the structure. Next, the house lines are staked out on the law in accordance with the plot plan, and then the footing is Doug. Still bars installed throughout the footing. A city inspector will then approve the footing prior to pouring concrete. Once the finance board, wood forms will be erected around the perimeter of the structure. These forms determine building size and finished floor elevation, another critical step in ensuring proper drainage.
At Edmond New Homes, we use only Warsbo waterlines PEX which are far superior to copper and freeze protection. After the forms are in place on the footing, plumbers will roughen all water and drain lines. The plumbers will run the main water line, sewer, and gas lines to the appropriate tie in locations at this time. Upon the plumbers completion in city inspection, filter is brought in it installed inside the wood frames to level off approximately 4 inches below the top of the forms. Any electrical lines that run beneath the slab are installed at this time. Next, post tension cables are installed in the steel bars extending from the footing are bent over in the slab area the footing inside together.
After this, the footing is clear to ensure proper placement of concrete in the full structure is treated with wanted chemical termite protection. Another city inspection is done to pouring any concrete, and upon inspection the slab is poured in the forms are removed. 7 to 10 days after the sob is poured, the post tension cables are tightened to 28,000 pounds of pressure per square inch and then cut flush with the slab. And of course, if you have any questions about any of this, we are here to help.
Please feel free to reach out to us if you have any questions, comments, or feedback for us. You can either call us at 918-688-5660 or 405-896-0333, or reach out to us on our online website answer website. You can also find all of her information, a full gallery, testimonials, and so much more online. We look forward to helping you create your perfect custom home.
Edmond New Homes
Now you have already started the construction process here at Edmond New Homes. No matter what stage were on, we will keep you informed and have a fully open communication with you to ensure that our quality is upheld and your standards are met. After all, we are here to make your custom dream home. Now that your custom designs are finalized, and the sob is poured, we can work on actually building the house. And of course, we only use the best appliances, material, and anything else to ensure 100% customer satisfaction.
Let’s go over the exterior process here at Edmond New Homes. Once the sob is poured, carpenters will begin the framing process. During this stage substantial process is made very quickly. Walls, headers, beings, floor trusses, and raptors are engineered to ensure proper structural properties throughout the dwelling. Many interior items and changes are left until the final stages of the framing process called punch out. Windows, doors, and fireplaces are installed in cabinets ordered at this time. The house wrap is installed on the walls to protect your home against moisture penetration. Brick ties are nailed on all the surfaces that will receive missionary to ensure that these walls are held tightly to the framing. Roofing shingles are applied in the house is in the dry phase.
Now let’s get into the mechanical matters we utilize at Edmond New Homes after the roof is on, the plumbers will turn to the top of the home, running additional water and drain lines as well as vent pipes and gas lines. They also install certain tubs and showers at this time. All lines are pressurized to protect against possible leaks later on. The furnaces are set in the ductwork runs throughout the house. Provision is made to return airflow to the furnaces and air handler and also the condensing units, which will be installed outside later on. Bathroom fans and been are now connected to the exterior at this time as well.
The electricians will roughen the wiring for the boxes, switches, receptacles, and lights. Heavy gauge wire will run for the cooking equipment and air-conditioners. Recessed light fixtures are installed at this stage, as are your cable TV and telephone outlets. All mechanical trades will have their roughen work inspected and then a frame an inspection is done to make sure no boards have been cut or moved that could cause structural weakness. Upon all approvals, insulation is installed in the walls that will be insulated and in certain and accessible feelings. All holes in exterior walls are filled with poly cell phone to maintain airtightness. Exterior masonry is normally installed about the same time.
At this stage, your home is a house, but not quite your home. We have built the structure of your dream home and now it’s time to customize it. We look forward to continuing this process with you and making sure that your entire custom home building experience is exactly what you want. Please reach out to us if you have any questions, comments, or concerns. You can either call us at 918-688-5660 or 405-896-0333, or check out our online website shawhomes.com.
Request More Information
Call Us Today!
Tulsa: (918) 688-5660
OKC: (405) 896-0333